Additional Information
Market:ASX
Sector:General Mining
EPIC:AUK
Latest Price: 0.04  (2.44% Ascending)
52-week High:0.47
52-week Low:0.04
Market Cap:7.44M
1 year chart
digital-look imported chart image
1 day chart
digital-look imported chart image
Augur Resources Full Augur Resources profile here

Augur Resources (ASX: AUK) has a focus on gold and copper within Indonesia and nickel projects within Eastern Australia. Augur’s key projects are the Wonogiri gold-copper project in central Java, Indonesia and the Jampang gold-copper project in western Java, Indonesia.

Pdf

Augur Resources' gold mineralised corridor at Randu Kuning extended to over 1300m

Friday, January 13, 2012 by Proactive Investors
Augur Resources' gold mineralised corridor at Randu Kuning extended to over 1300m

Central Java focussed Augur Resources (ASX: AUK) has four drill rigs turning at the Wonogiri project.

Two of the drill rigs are defining the extent of mineralisation at Randu Kuning, while two rigs are targeting regional geochemical and geophysical targets.

Augur has earned a 51% interest in the project and can earn an 80% interest in the project with the expenditure of a further US$2.0 million by 9 December 2012.

The Wonogiri project is located approximately 30 kilometres to the south of the provincial city of Solo in central Java.

Drill results

Today's drill results from three diamond drill holes from the Wonogiri project include the following:

Hole WDD024 was drilled to test down dip extension of mineralisation below WDD017 (55.0 metres at 0.41 g/t gold and 0.16% copper). Holes

WDD024 and WDD017 are located in the north of the Randu Kuning prospect.

Hole WDD024 intersected wide zones of mineralisation including 94.0 metres at 0.37 g/t gold and 0.21% copper from 95.0 metres and a further 18.0 metres at 0.21 g/t gold and 0.17% copper from 194.0 metres.

The results from hole WDD024 are considerable as they show the continuation of mineralisation to the north and the continued potential for mineralisation at depth.

Anomalous molybdenum

Interestingly, hole WDD024 intersected zones of anomalous molybdenum and copper bearing bornite sulphides. This is the first hole where bornite has been identified in this drill program.

The occurrence of bornite and molybdenum support the geological model that Randu Kuning is a multiphase porphyry intrusive system with potential at depth. The widening of the mineralised zone appears to be consistent with the pattern of mineralisation identified in the central Randu Kuning zone.

Hole WDD025

This was drilled over 175 metres south of the southern most holes at Randu Kuning. The hole was targeted on a magnetic high within an interpreted northwest trending mineralised corridor which contains the Randu Kuning porphyry. This corridor has a strike of over 1,300 metres.

Hole WDD025 intersected wide zones of gold mineralisation which include 35.7 metres at 0.34 g/t gold from 145.8 metres and 9.1 metres at 0.53 g/t gold from 185.9 metres.

This hole is significant as it shows that the southern extent of the Randu Kuning mineralisation may not be closed off by the earlier drilling and the potential for significant mineralisation beyond that already identified is high.

Further drilling will be undertaken to identify the extent of the mineralisation in the zone between the Randu Kuning mineralisation and hole WDD025.

Hole WDD026

Drilled to test the continuation of mineralisation down dip of hole WDD015 and WDD021. The most significant interval of mineralisation in the hole was 101.8 metres at 0.43 g/t gold and 0.15% copper from 143.0 metres.

Current program

A drill rig capable of testing to depths of greater than 1,200 metres is targeting mineralisation at depth below Randu Kuning. The first hole drilled by this rig is currently at approximately 600 metres depth.

Further metallurgical testing is continuing on the porphyry mineralisation at Randu Kuning.

Wonogiri Project

The Wonogiri project is located approximately 30 kilometres to the south of the provincial city of Solo in central Java and is accessible by daily flights from the capital Jakarta and a short one hour drive by car on a sealed road.

The project lies within the Sunda‐Banda arc and covers and area of 3,928 hectares. The area is considered prospective for epithermal gold and porphyry copper‐gold mineralisation.

Previous exploration completed by PT Oxindo from 2009 to 2010 targeted copper porphyry mineralisation within the northern portion of the licence.

A number of significant porphyry deposits (+/‐ associated epithermal mineralisation) sit along this zone including Newmont Mining Corporation’s operation at Batu Hijau (914Mt at 0.53% Cu and 0.40 g/t gold), Newmont’s Elang deposit on the island of Sumbawa and Intrepid Mines Tujuh Bukit (1,700Mt at 0.41% copper and 0.46 g/t gold) in eastern Java.


Analysis

The Wonogiri project has become the flagship project of the company as drilling continues to indicate a significant area of mineralisation associated with the Randu Kuning porphyry system.

Significantly, mineralisation at Randu Kuning has been identified from surface and remains open at depth.

In addition, the porphyry mineralisation remains open to the north and to the west.

Drilling during 2012 will be aimed at defining the edges of the system.

Given the drill results to date and the structural zone similarities to significant porphry deposits, clearly Wonogiri is shaping up as a significant project with large scale potential which should become more defined in 2012.

No investment advice

The Company is a publisher and is not registered with or authorised by the Financial Services Authority (FSA). You understand and agree that no content published on the Site constitutes a recommendation that any particular security, portfolio of securities, transaction, or investment strategy is suitable or advisable for any specific person. You further understand that none of the information providers or their affiliates will advise you personally concerning the nature, potential, advisability, value or suitability of any particular security, portfolio of securities, transaction, investment strategy, or other matter.

You understand that the Site may contain opinions from time to time with regard to securities mentioned in other products, including company related products, and that those opinions may be different from those obtained by using another product related to the Company. You understand and agree that contributors may write about securities in which they or their firms have a position, and that they may trade such securities for their own account. In cases where the position is held at the time of publication and such position is known to the Company, appropriate disclosure is made. However, you understand and agree that at the time of any transaction that you make, one or more contributors may have a position in the securities written about. You understand that price and other data is supplied by sources believed to be reliable, that the calculations herein are made using such data, and that neither such data nor such calculations are guaranteed by these sources, the Company, the information providers or any other person or entity, and may not be complete or accurate.

From time to time, reference may be made in our marketing materials to prior articles and opinions we have published. These references may be selective, may reference only a portion of an article or recommendation, and are likely not to be current. As markets change continuously, previously published information and data may not be current and should not be relied upon.